Products

13+3+3µm Safety Coated Coating Battery Foil  features a uniformly applied bifunctional composite layer (conisting of conductive carbon-based material and solid-state electrolyte safety primer) on an aluminum current-collecting foil, enhancing protection against penetration by external sharp objects, preventing dendrite penetration, reducing surface resistance of the aluminum foil, minimizing side reactions in the electrolyte solution, and addressing the inherent lack of toughness in metal foils.

12+3+3µm Safety Primer Coating Foil have a dual-functional composite layer (conductive carbon + solid electrolyte safety primer) evenly on aluminum current collector foil. Safety Primer Coating Foil (FATP) integrates conductive and ion-conducting protection layers in one material. It suppresses dendrite piercing, boosts high-rate conductivity, cuts electrolyte side reactions and strengthens foil flexibility. Optimized for power & energy storage lithium cells, it simplifies battery production while greatly improving cell safety, cycle life and energy density.  

13+0.6+0.6 Battery Cathode Collector Primer Aluminum Foil is a composite material, which made up with high quality aluminum foil and double conductive carbon layer. Widely adopted as the cathode collector for storage batteries, vehicle batteries, etc.  This type of battery cathode aluminum foil can reaches the aim of  lower interfacial contact resistance, stronger bonding between conductive active materials and the substrate, good inhibition of aluminum foil oxidation and corrosion, longer battery cycle life and boosts overall safety.

The 12+1+1μm Primer Aluminum Foil is a composite material formed by coating conductive carbon layers onto electronic-grade aluminum foil substrates, which serves as the cathode current collector for lithium-ion batteries. It cuts contact resistance, strengthens the adhesion of cathode active materials, and shields the aluminum substrate from oxidation and electrolyte corrosion, effectively boosting battery cycle life, safety performance and batch consistency of cells.

12+2+2 Safety Primer Aluminum Foil for Battery Cathode Collector uses a composite coating layer, which enhances the battery toughness and avoids the risk of sharp puncture. It acts as the cathode collector material for power storage batteries, vehicle batteries, and consumer batteries.  Because of its great chemical performance, this battery cathode aluminum foil can deliver lower interfacial contact resistance, stronger adhesion between conductive active materials,  better aluminum foil corrosion resistance performance, longer battery cycle life, and improved overall battery stability and safety.  

13+1+1μm Primer Aluminum Foil for Battery is a product that employs a composite coating design comprising a carbon layer and a solid electrolyte layer. Due to its advanced advantages, the 13+1+1μm Primer Aluminum Foil is widely used as the cathode collector for storage batteries, vehicle batteries, etc.  

13+1+1µm Carbon-Coated Battery Aluminum Foil is commonly used as the cathode current collector for batteries, it is manufactured by coating double conductive slurry on the surface of pre-treated aluminum foil;  It delivers reduced resistance, superior active material adhesion, alongside oxidation and corrosion resistance, which prolongs battery cycle life and enhances cell safety.

12+1+1µm Carbon Coated Battery Aluminum Foil is a composite foil; it is manufactured by coating a conductive slurry on the surface of pre-treated aluminum foil; it is used as a positive current collector in batteries. It supports lower resistance, higher adhesion of active materials, and anti-oxidation and corrosion, extending the battery life cycle and improving battery safety.

12+0.8+0.8  Battery Cathode  Collector Carbon Coated  Aluminum Foil is a composite material made from pure aluminum foil substrate with a conductive carbon layer applied on the surface through gravure coating. Widely adopted as the positive electrode current collector for lithium-ion batteries, it lowers interfacial contact resistance, strengthens bonding between conductive active materials and the substrate, inhibits aluminum foil oxidation and corrosion, delivers more consistent cell performance, prolongs battery cycle life and boosts overall safety.

12+0.6+0.6µm Carbon Coated Aluminum Foil is a composite foil fabricated by depositing a conductive carbon layer on the surface of electronic aluminum foil substrate, primarily used as a positive current collector in lithium-ion batteries. By reducing contact resistance, enhancing adhesion of active materials, and preventing oxidation and corrosion of the aluminum foil, it significantly improves battery cycle life, safety, and cell consistency.

15+1+1µm Carbon Coated Aluminum Foil is a composite foil fabricated by depositing a double conductive carbon layer on the surface of electronic aluminum foil; it acts as a positive current collector in batteries. It supports lower resistance, higher adhesion of active materials, and prevents oxidation and corrosion of the aluminum foil to extend the battery life cycle and improve battery performance.

13+0.8+0.8 Carbon Coated Battery Cathode Aluminum Foil is a composite material based on pure aluminum foil, where a conductive carbon layer is deposited onto its surface via gravure coating technology. It is primarily used as the positive current collector in lithium-ion batteries. This material reduces battery contact resistance, enhances adhesion of conductive active materials, prevents oxidation and corrosion of the aluminum foil, improves cell performance consistency, extends battery cycle life, and enhances safety.